Simple IP Config is a tiny portable tool which makes it easy to change various network settings: your IP address, subnet mask, gateway and DNS servers.

You can do this from Windows, of course, but it's not exactly straightforward. In Windows 7, for instance, you might go to Control Panel > Network and Internet > Network and Sharing Centre > Change Adapter settings, before right-clicking your adapter, selecting Properties, selecting TCP/IPv4, and clicking Properties.

With Simple IP Config, though, you just run the program. It automatically displayed the details for our main internet connection. And if we wanted to, say, specify a couple of DNS servers, then it's simply a matter of typing their IP addresses into the relevant box. There are no tabs, no menu options, no ways to hide settings elsewhere: everything you need is on the same screen.

If you're still having problems connecting across your network then options to disable the (Windows) firewall, release and renew your IP address may also help.

And if for some reason you need to keep changing any of these settings, then Simple IP Config can be minimised to your system tray for easy access later.

Version 2.3 brings:
- New Additions:
  - Advanced Mode
    - Disable a network adapter
    - Disable Windows Firewall
  - Options Menu
    - Auto-set Gateway to typical values
    - Auto-set DNS server to typical values
  - Additions to Current Information box:
    - Alternate DNS Server
    - Adapter State
- Much improved file handling
- Significant improvements to stability

Verdict ratingsratingsratingsratingsratings

The Simple IP Config interface has a few oddities, but you'll quickly figure out how everything works, and it's certainly easier to use than burrowing deep into your TCP/IP settings.